Royal Flex Circuits Receives a Perfect 12-Month Quality Rating from Largest Medical Device Company

Royal Flex Circuits has been producing circuit boards for ventilators for over 10 years.  So, when the country needed help ramping up its supply of ventilators, Royal Flex and its customer, the largest medical device company in the world, answered the call.

Over the past 12 months, Royal Flex has increased the number of circuit boards fabricated for ventilators by 23.7%. Even more impressive than the increased output, is the fact that the company has received a 100% quality score for all 12 months. This means that every single PCB delivered worked perfectly the first time with zero defects!

“While achieving a 100% quality score is a tremendous accomplishment by itself, the fact that our team was able to deliver perfect work under the stressful, quick-turn conditions of the pandemic is an incredible feat,” said Victor Hemingway, president of Royal Flex Circuits. “I could not be prouder of the employees that come to work every day and do their part to save lives.”

 

Royal Flex Circuits manufacturers rigid, rigid-flex, and flexible printed circuits in 2-4 days. It is part of the Royal Circuits Group, the world’s fastest PCB manufacturer specializing in quick-turns for prototypes and low-volume production orders. For more information visit https://www.royalcircuits.com/flex-rigid-flex/.

Recent Posts

Never Pay for a Programming Header Again!

Off-board connectors are expensive to purchase and usually expensive to install.  If they are necessary for a design, then you have to bite the bullet and purchase them.  Fortunately, the cost is amortized over the lifetime of the project.  For most electronics projects though, the often-used rectangular programming headers are one-time-use devices — and it’s… View Article
Read More

New Customer Special 2021

There’s Never Been a Better Time to Give Us a Try! Throughout 2020, Royal Circuits reinvested in the company so that our customers can get the best quality PCBs in the fastest possible turns. Thousands of engineers trust us to deliver their PCBs on-time and on-budget. 5 x 5 Rigid Special 5 Boards 5-Day Turn… View Article
Read More

Simulation and Measurement Tutorial

Introduction Civil Engineers have a saying: “Any idiot can build a bridge that stands.  It takes an engineer to make a bridge that can barely stand.”  To achieve their goals, Engineers have finite element and lumped element analysis available to them that allows them to simulate all manner of loading and failure analysis.  With that… View Article
Read More

Share

Share on twitter
Share on pinterest
Share on facebook
Or use this public share link